The Asaph 1×15 B


Out of stock

The Asaph 1×15 Bass

  • Hand made in our facility in Indiana USA with all American made materials.
  • Constructed from all 3/4″ tone woods.
  • There is zero MDF or particle board used anywhere in our cabs.
  • Front loaded, Quad ported, floating baffle.
  • All steel hardware.
  • Choice of handles.
  • Equipped with our wiring harness and Lichtenstein Neutrik SpeakON 1/4″ combo input jacks.
  • Point to point hand wired with silver solder.
  • Wired with 12 American wire gauge acoustic research speaker wire.
  • 4 or 8 ohms with 2 harness options.
  • Power Handling = 500 watts RMS
  • Frequency Response 52 Hz – 2.3 Khz
  • Loaded with an Eminence Kappa 15 A or C driver.
  • The Asaph comes with reinforced rubber feet on two sides for horizontal or vertical placement.
  • Horizontal
  • Height = 18 inches, Including the Rubber feet.
  • Width = 28 Inches
  • Depth = 16 Inches
  • Weight = 48 Pounds
  • Vertical
  • Height = 28 inches, Including the Rubber feet.
  • Width = 17.5 Inches
  • Depth = 16 Inches
  • Weight = 48 Pounds

The Asaph 1×15 B cab is capable of filling in the bottom end of any well-rounded bass tone or, working very well as a standalone bass cab. With plenty of bass, middle, and treble articulation the Asaph 1×15 has a slightly slower but deeper low-end punch due to the larger speaker cone surface area. This cab is very full, warm, and loud. The Asaph has a nice pop to the mid-range and a surprisingly open top end. These tend to be very versatile, open and easy to manipulate with simple EQ adjustments. This cab can double as a Key Board cab and sounds incredible.

The low-end feels and sounds like the cab take’s a deep breath and then quickly throws out the low-end concussion with a punch and edge that hits hard and deep with a thick sustaining effect to the air around it. The Asaph is a great way to project the low and low middle part of your tone coupled with a BassBomb to complete an audible round house punch of bass. The Slag of the low end and minimal reaction time difference makes for a massively hard-hitting combination when combining the 2 cabs.

The Asaph is popular with our 5 string Funk players. With a low B, octave down or “Sub Up” FX pedal can turn this into a brutalizing wall of sound that makes any other rig sound like it is struggling to come close to what the Asaph easily delivers. This cab, much like the BassBomb or Ozlo 2×12, is something you must truly experience in person to grasp the gravity and depth this cab will deliver.

Click the icons below for more information.

ShippingEarCandy's Shipping methods and policy
WarrantyThe EarCandy™ Lifetime Warranty Policy and Guidelines
Tech supportEarCandy Tech Support
American made materialsEarCandy BRAND ITEMS ARE MADE IN THE USA

Need cables? CLICK HERE

Thank you!

Weight 55 lbs
Dimensions 30 × 20 × 20 in

The above dimensions are the shipping dimensions for this cab.
We ship all our guitar and bass speaker cabinets with UPS or Fed-Ex, Insured. All Cab shipping prices are for the lower 48 United States only. Shipping to Hawaii, Puerto Rico & Alaska will require an additional payment before the cab can ship. We do ship to APO and FPO address’s for US Military service members. We do ship overseas to Australia, France, Spain, Italy & The United Kingdom. In order to process a shipment to one of these locations, please use the CONTACT US page and send us your full ship to address and we will E-Mail you back with a full shipping cost quote.

Cabinet Dimensions

Height – 18 inches = Including the Rubber feet.
Width – 28 Inches
Depth – 16 Inches
Weight – 48 Pounds

Height – 28 inches = Including the Rubber feet.
Width – 17.5 Inches
Depth – 16 Inches
Weight – 48 Pounds


This Cabinet comes loaded with An Eminence Kappa 15.